Click here to:
CAPACITOR
DISCHARGE WELDING POWER SUPPLIES
SIMPLE,
COST EFFECTIVE
WELDERS SUPPLYING
CONSISTENT WELD
ENERGY, EVEN WHEN
LINE VOLTAGE
FLUCTUATES |
 |
| |
|
YH-25 & VT-S SW-7-160WM |
 |
The
SW Series capacitor discharge power supplies provide consistent
weld energy even in situations where the line voltage experiences
fluctuations. Our supplies provide a simple, cost-effective
welding supply and are an excellent choice when the welding
application requires a rapid rise time and high-energy
discharge. |
CAPACITOR DISCHARGE WELDING POWER SUPPLIES
 |
FEATURES
AND BENEFITS: |
 |
- Precise,
consistent output, even at low charge levels - weld
quality independent of line voltage fluctuations
- Selection
of demagnetization feature - prevents residual magnetism
of welding transformer
- Adjustable
charging speed for rapid recharging - significantly
increases production rates - Short time repetition
speed of 2 welds per second
- Compatible
with air or manually actuated weld heads
- Simple
programming
- Easily
incorporated into automated systems for increased production
rates
- Current
up to 10,000A; Timer Range up to 20 msec.
|
Lockout
System:
Prevents discharge before set voltage is reached - eliminates
poor welds caused by firing the power supply before the capacitor
bank is properly charged Alarms& interrupts charging when conditions
are out of set parameters - isolating potential quality problems,
improving productivity.
EXCELLENT
CHOICE
WHEN THE WELDING
APPLICATION REQUIRES
A RAPID RISE TIME AND
HIGH ENERGY DISCHARGE |
 |
F1
1V
2ms |
|
|
APPLICATIONS
FOR CAPACITOR DISCHARGE WELDING:
Lighting
components - Incandescent/Vapor phase: Filament, Foil,
and Post
Automotive
electronic modules
Consumer
products: Hair dryer elements, Toaster elements, Sensor
wire connection
Battery
packs
|
|
|
OPTIONS:
Welding
Monitor
Monitors weld quality and provides SPC data, improving process control
8-Weld
Schedules Module
Provides repeatable process control and facilitates multiple applications
Alternating
polarity for pre-pulse & weld pulse
Can be specified, facilitating and improving weld quality
Weld
Head Controller
|
|
|
MTI SERVICE
Seiwa
products from MTI MicroWelding are deigned and built
using production experience and customer feedback. MTI
is committed to work in partnership with customers to
solve a variety of process challenges and guarantee the
highest quality in all of our products and technical
services. |
CAPACITOR
POWER SUPPLIES DISCHARGE
|
Model |
Input
Power Source |
Output
Capacity |
Repetition
Rate (200 V charge) |
Dimensions
H x W x D(mm) |
Weight |
|
SW-7-80 |
100
or 200 VAC (+/- 10%) 50/60Hz
200
VAC (+/- 10%) 50/60 HZ |
80W's |
100
welds/min. |
290
x 165 x 400 |
14kg |
|
SW-7-160 |
160W's |
18kg |
|
SW-7-300 |
300W's |
75
welds/min. |
545
x 280 x 430 |
43kg |
|
SW-7-500 |
500W's |
65
welds/min. |
48kg |
CAPACITOR
DISCHARGE TRANSFORMERS
| Model |
Weld Heat Time:Tap
(200V charge) |
Power Supply |
Dimensions
H x W x D(mm) |
Weight |
| PT1608 |
1.2~3.2msec : 3 |
SW-7-80
SW-7-160 |
190 x 165 x 165 |
4.5kg |
| PT-2008 |
2.5~7.0msec : 3 |
9.5kg |
| PT-5010-20 |
5.0~10.0msec : 3 |
230 x 215 205 |
13.9kg |
| PT-5K8B |
207~3.9msec : 3 |
SW-7-300 |
250 x 250 x 250 |
30.0kg |
| PT-5205H |
4.4~5.7msec : 3 |
SW-7-500 |
250 x 230 x 280 |
54.0kg |
Process
Evaluation | Equipment Selection
Guide | Why MTI? | Links | Home
|
